output:plotpointfile
This is an old revision of the document!
Plotpointfile
If plotpointfile
is defined in your parameter file, potfit will write this file after the optimization is complete.
The plotpointfile contains a special representation of the potentials, only including the datapoints corresponding to parameters in the optimization. If you need the interpolated potentials, take a look at the plotfile.
Format
The format is very simple, the potentials are written in the same order as in the potential file and are separated by two empty lines.
# distance potential_value internal_parameter_number .800000e+00 1.371272e+00 2 2.005203e+00 7.580872e-01 3 2.210407e+00 3.380089e-01 4 2.415610e+00 6.320161e-02 5 ...
Here is an example, showing a potential that was optimized at 25 sampling points.
This feature is only available for tabulated potentials.
output/plotpointfile.1537693371.txt.gz ยท Last modified: 2018/09/23 11:02 by daniel